Proline-X | Sealed 10" Enclosure | Loaded with Prodigy Audio NB3

Proline X Enclosure — Built in Tennessee CNC-cut Langboard Elite 3/4" MDF, V-groove + dado joinery, recessed ABS/Carbon Fiber terminal cup.

Driver + Enclosure — Matched and Pre-Wired Subwoofer pre-installed and wired to the correct impedance. Connect your amplifier and it's ready to run.

Shipping Included  Assembled to order in 2–5 business days 

 days. No freight charges at checkout.

Amplifier, power wire, and RCA cables not included

Shipping is included in the price. No freight charges at checkout — what you see is what you pay.

Assembly & Lead Time
Proline X enclosures ship assembled to order. Components are CNC-cut and staged in inventory. Once your order is placed, allow 2–5 business days for final assembly, bonding, and finishing before it ships.

How It Ships
Single 8", 10", and most 12" enclosures ship UPS Ground. Oversize enclosures, some loaded enclosures, and anything over 160 lbs ship LTL freight on a pallet. If your order ships freight, the carrier will contact you to schedule a delivery window — provide a valid phone number at checkout. Freight delivery is curbside; the driver is not responsible for moving the enclosure past the curb.

Inspect Before You Sign
For ground shipments, photograph any exterior box damage before opening. For freight, inspect the pallet while the driver is present. If you see damage, write "DAMAGED" on the Bill of Lading before signing. Do not sign a clean receipt for a visibly damaged freight shipment — it closes the damage claim.

Returns
Non-defective returns are subject to a 20% restocking fee and return shipping at buyer's expense. Enclosures that have been drilled into or modified are not eligible for return.

Alaska & Hawaii
Additional charges may apply for shipments outside the contiguous 48 states.

Why Proline X?

Most enclosures are built to a price point. Proline X is built to a spec. Every box starts with published-data MDF, gets CNC-cut to exact internal volume, and is assembled by hand in our Tennessee facility. The difference shows up in the measurements — and in how the box holds up two years into daily use.

CNC-Cut to Spec

Panels are machine-cut on ShopSabre CNC routers and joined with V-groove and dado joinery. Consistent geometry, no hand-cut variance, no gaps at the joints.

Handcrafted in USA

Hand-assembled at our facility in Tullahoma, TN. Every enclosure is inspected before it ships.

Tuned to the Build

Internal volume and port geometry are calculated to spec and CNC-cut to exact dimensions. The box performs the same way every time.

Built From a Spec Sheet, Not a Sales Sheet

Every Proline X Performance Series enclosure is CNC-cut from Langboard Elite MDF — 3/4" (18mm) panels produced to published mill specifications. Most enclosure manufacturers source generic MDF without published data. We can tell you the internal bond rating, the modulus of elasticity, the modulus of rupture, and the face and edge screw holding strength for every panel in this enclosure — because we chose the material based on those numbers, not on price or availability.

Langboard Elite is produced in the United States. The specifications below are pulled directly from Langboard's published mill data and are verifiable. This is the same panel stock used in our full Proline X lineup.

Specifications are published mill data from Langboard. All values are for 3/4" (18mm) panels at standard conditions. Actual performance is subject to manufacturing tolerances.

Internal Bond

200 psi — The Number That Actually Matters for Enclosures

The internal bond rating measures how well the MDF panel resists delamination under sustained pressure applied perpendicular to the face. In a subwoofer enclosure, every bass transient generates a pressure pulse that pushes outward on every panel simultaneously. A panel that begins to delaminate internally loses stiffness gradually — the symptoms are slow: a box that starts to sound softer, less defined, less punchy over months of use. 200 psi internal bond is the spec that determines how long this enclosure holds its acoustic integrity under daily use at real power levels.

Stiffness

410,000 psi MOE — Less Flex, Less Resonance

The modulus of elasticity measures panel stiffness — resistance to bending under load. A stiffer panel flexes less under the pressure generated by a high-excursion driver at volume. Panel flex is a source of acoustic coloration: the panel itself begins to radiate sound at its own resonant frequency, adding distortion to the output. 410,000 psi stiffness combined with V-groove and dado joinery means the panels stay rigid and the bracing controls resonance at the structure level — not the panel level. The bass you hear comes from the driver, not the box.

Screw Holding

325 lb Face / 250 lb Edge — Joints That Stay Locked

Screw holding strength determines how firmly the panel grips a fastener at the face and at the edge. This matters most at the baffle joint — where the front panel meets the side panels and where the driver is mounted. A panel with low screw holding strength allows fasteners to loosen over time under vibration, leading to air gaps at the joint and loss of acoustic seal. 325 lb face screw holding strength means the baffle hardware stays put. Combined with dado joinery and adhesive, the front panel on a Proline X Performance Series enclosure is not going anywhere.

Sourcing

Named Panel Stock — Not "Premium MDF"

the phrase "premium MDF" or "high-density MDF" appears on marketing copy for enclosures across every price point, from $40 to $400. It is not a specification — it is a description with no defined standard. Langboard Elite is a named, sourced, mill-documented product with published data. We name it in our copy because naming it holds us accountable to the spec. You can look up Langboard Elite independently, verify the numbers on this page, and confirm you are getting what we say you are getting. That is the point.

The NB3 Series of woofers offer a ultra shallow depth for working well under and behind truck seats as well as other tight spaces. The 10” version, for example, is only 3.00” deep. These are designed to optimally perform in extremely small enclosures and in most truck prefab enclosures. Housed inside of a rugged metal basket, you will find an oversized 70 ounce ferrite magnet that uses a 2.5” voice coil with the ability to withstand temperatures up to 500f and has a FEA designed center pole vent for removing the btu’s from the motor and voice coil gap. The spiders are made of a high-quality Cotton and Nomex blend with stitched in flat tinsel leads. This woofer is a work horse and really shines in small, sealed and ported enclosures.

Features:

• RMS Power 600 Watts on 10"
• 10” and 12” Sizes
• Xmax of 11mm one way at 70% BL
• High temperature 4 layer copper voice coil
• Black aluminum 2.5” voice coil former
• Dual 4 ohm coil Treated paper cone with rubber surround
• Center pole vent optimized for moving BTU’s
• Strong steel frame with logos
• Quality chrome push terminals
• Flat stitched tinsel leads

Specifications:

Cut Outs & Sizes