2.6K2X
2-Way Speaker System with 1"/25 mm Tweeter
 
2.165 II
6.5"/165 mm Mid-Woofer
- ABS basket reinforced with fiberglass. The basket has been engineered in order to obtain the maximum torsional rigidity (resistance to bending), but at the same time, offer the minimum resistance to the passage of air.
- Pressed paper cone with waterproof treatment. It is widely recognized that cones made of paper offer the ideal marriage between lightness, stiffness and the ability of the cone to dampen any unwanted vibration (read: distortion).
- High damping, single wave rubber surround. The Perbunan® rubber edge is much more with temperature changes than standard rubber.
- The 25 mm voice coil uses an aluminum support and a double layer winding technology of copper wire with an aluminum core.
- High grade ferrite magnet with significantly higher performance than "standard" magnets.
 
Technical Specifications
- Nominal Impedance: 4 Ohm
- Nominal Power Handling: 120 Watt
- Transient Power: 240 Watt
- Frequency Response: 65 Hz ~ 9 KHz
- Sensitivity: 91.5 dB 2.83v/1m
 
2.25
1"/25 mm Dome Tweeter
 
Speaker Type: Component Tweeter
Nominal Diameter: 1”/25 mm
Nominal Impedance (Znom): 4 Ohms
Continuous Power Handling: 80 W
Peak Power Handling: 160 W
Rec. Amplifier Power: 20 - 110W (RMS)
PARAMETERS
Voice Coil Resistance (Re): 3.71 Ohms
Voice Coil Diamater: 25.4 mm
Free Air Resonance (Fs): 1300 Hz
Sensitivity: 89.0 dB @ 1W/1m
 92.0 dB @ 2.83V/1m
Electrical “Q” (Qes): 1.686
Mechanical “Q” (Qms): 1.129
Total Speaker “Q” (Qts): 0.676
DESIGN BANDWIDTH
With 48 dB/oct. HP filters: 2 KHz - 25 KHz
With 24 dB/oct. HP filters: 2.2 KHz - 25 KHz
With 12 dB/oct. HP filters: 2.4 KHz - 25 KHz